Customization: | Available |
---|---|
Type: | Signal Repeater |
Transmission Medium: | Cable |
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
Support NSA+SA Mode
The real Speed test up to 300Mbps+(SISO)
4+5G Integrated design, easy deployment
Built-in Auto Gain Control (AGC)& Auto Level Control(ALC)
Built-in 5G base band synchronous detection module(SDM) to ensure accurate synchronization with donor base station.
Configure 5G TDD uplink and downlink timeslot format flexibly through software.
AC-FTD-L+N-D-S | 4G FDD | 5G TDD | |
Frequency Range | Uplink | B1/2/3/4/5/7/8/20/28 | N41/77/78/79 |
Downlink | B1/2/3/4/5/7/8/20/28 | N41/77/78/79 | |
System or Band | Dual Band Combination,Any above two systems can be selected | ||
Number of Channels/ Bands | 1 | 1 | |
Bandwidth per Channel/Band | 5/10/15/20MHz adjustable | Max. 100 MHz | |
Max. Gain | 70 ±2 dB | 70 ±2 dB | |
Manual Gain Control | 31 dB in step of 1 dB | 31 dB in step of 1 dB | |
Automatic Gain Control | >= 30 dB | >= 20 dB | |
Gain Flatness | <= 3 dB (peak-to-peak) | <= ±3 dB (peak-to-peak) | |
Max. Input Power Without Damage | 0 dBm | 0 dBm | |
Output Power | Uplink | 17 ±1 dBm | 17 ±1 dBm |
Downlink | 17 ±1 dBm | 17 ±1 dBm | |
Operating band unwanted emissions | Comply with 3GPP | Comply with 3GPP | |
Spurious Emission |
9kHz~1GHz | <= -36dBm | <= -36dBm |
1GHz~12.75GHz | <= -30dBm | <= -30dBm | |
ACRR | <=-40dBc/30KHz@±20MHz | <=-40dBc/30KHz@±100MHz | |
<=-45dBc/30KHz@±40MHz | <=-45dBc/30KHz@±200MHz | ||
EVM | <= 8% | <= 3.5% | |
Frequency Stability | <= ±0.01 ppm | <= ±0.01 ppm | |
Group Delay | <= 4.5 μs | <= 4.5μs | |
Noise Figure | <= 7 dB Typical | ||
VSWR | <= 1.8 | ||
RF Connector | SMA-Female*2 | ||
Impedance | 50 Ω | ||
Power Supply | AC 90~240 V, 50/ 60 Hz | ||
Power Consumption | <= 45 W | ||
Dimension (W x H x D) | 200*156*50 mm | ||
Weight | <= 2 Kg | ||
Environmental Condition | IP40 | ||
Operating Temperature | -10 ºC to 55 ºC | ||
LED Indicator | RSSI | Green LED *3 to Indicator Receive Power Level | |
ALRM | Red LED *1 to Indicator the Booster is Alarming | ||
PWR/SYNC | Green LED *1 to Indicte the Booster is Operatiog | ||
Control & Monitoring | Local | Via Micro USB |