| Customization: | Available |
|---|---|
| Type: | Signal Repeater |
| Transmission Medium: | Cable |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Digital filtering supports adjustable bandwidth, each band supports Up to 3 sub-bands
Each subband is turned on and off, and gain control is performed separately.
Donor signal monitoring for easy optimization and troubleshooting
RJ45 Cable for local connection & wireless modem for remote monitoring (optional)
Intelligent algorithm to prevent UL interference
Supports 2G,3G,4G & 5G NR FDD Technologies
| WR23PDM-GWL91821 | 900 MHz | 1800 MHz | 2100 MHz | |
| Frequency Range | Uplink | 880MHz - 915MHz | 1710MHz - 1785MHz | 1920MHz - 1980MHz |
| Downlink | 925MHz - 960MHz | 1805MHz - 1880MHz | 2110MHz - 2170MHz | |
| Number of Bands | 1~3 Sub-band | 1~3 Sub-band | 1~3 Sub-band | |
| Bandwidth | Each Sub-Band support (0.4 - 20 MHz adjustable) Step/200KHz | |||
| Max. Gain | UL >= 80 ±3dB ; DL >= 85 ±3dB | |||
| Manual Gain Control | 30 dB in step of 1 dB | |||
| Automatic Gain Control | >= 20 dB | |||
| Gain Flatness | <= ±2.5 dB(Each Sub-band) | |||
| Max. Input Power Without Damage | 0 dBm | |||
| Output Power | Uplink | >= 20 ±2dBm | ||
| Downlink | >= 23 ±2dBm | |||
| Spurious Emission | Comply with 3GPP | |||
| Operating band unwanted emissions | Comply with 3GPP | |||
| ACPR | ±20MHz | <=-40dBc | ||
| ±40MHz | <=-45dBc | |||
| EVM | UMTS<= 12.5% ; LTE<= 8% | |||
| Frequecy Stability | <= ±0.01 ppm | |||
| Noise Figure | Uplink | <= 7 dB | ||
| VSWR | <= 2.0 | |||
| Group Delay | <= 6 μs | |||
| RF Connector | N-Female*2 | |||
| Impedance | 50 Ω | |||
| Power Supply | AC 90~240 V, 50/ 60 Hz | |||
| Power Consumption | <= 70 W | |||
| Dimensions | 330*258*95 mm | |||
| Weight | <= 7 Kg | |||
| IP Rating | IP65 | |||
| Operating Temperature | -25 to 55 ºC | |||
| LED Indicator | RUN: Green LED * 1 to Indicate The MCU status | |||
| PWR: Green LED * 1 to Indicate The Unit Is Operating | ||||
| ALM: Red LED * 1 to Indicate any coming Alarm from repeater | ||||
| MODEM: Green LED * 1 to Indicate The Modem status | ||||
| Control & | Local | Via RJ45 | ||
| Remote | Via Wireless Modem (optional) | |||
){kind=link}